Klean Strip Paint & Varnish Stripper Aerosol- Strips 5 Layers of Latex Paint & Oil or Alkyd Paint, Works Ideal on Metal, Masonry & Wood, Will Not Raise Wood Grain- 16oz with Centaurus AZ Putty Knife
Kwik strip Paint and Varnish Stripper is the perfect choice to strip off the old paint from your walls, wood and antiques. It is the strongest, safest, and fastest patent pending formula that works in just 15 minutes. Shake well. You just need to hold the can in an upright position approximately 12" to 14" from surface. Point arrow on top of the button away from you. Using a back-and-forth motion, apply a generous but even coat of remover to one small area at a time (up to 9 sq ft) because health safety risks will increase dramatically when used over large areas. Allow time for remover to work. Do not rush. Test a small area to see if finish is ready for removal. Scrape off loosened finish by gently working in the direction of wood grain with a chemical-resistant plastic scraper. Wipe off sludge with rough cloth or medium steel wool. Repeat application if finish is particularly stubborn. Do not forget to wear chemical resistant gloves before use. Helpful Tip Protect surrounding area from overspray with a heavy plastic drop cloth. Do not use on linoleum, plastic, rubber, asphalt tile, fiberglass or other synthetics. Removers may harm these surfaces. For best results, use in temperatures between 65°F and 85°F, and away from strong breeze and hot sun. If spray tip becomes clogged, remove from can and hold under hot water. Replace tip making sure arrow is aimed away from you.